Software developed by MITCalc
-
by MITCalc
Geometrical design and strength check of a prestressed bolt connection, loaded by static or cyclic loading resp., acting both in the axis of the bolt and in the plane of the connected parts. Calculation support many 2D CAD systems
License: Free to try |
Download [ 1.5 Mb ]
-
by MITCalc
Geometric design and strength check of bevel gear with straight and helical toothing. Application supports Imperial and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems
License: Free to try |
Download [ 2.1 Mb ]
-
by MITCalc
This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and many others. MITCalc support 2D (and 3D) CAD systems, Imperial and Metric units and many international standards (ANSI, ISO, DIN….).
License: Free to try |
Download [ 20.7 Mb ]
-
by MITCalc
Geometric and strength designs of spiral cylindrical torsion springs loaded with static or cyclic loading. Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems.
License: Free to try |
Download [ 2.1 Mb ]
-
by MITCalc
Two programs for the tolerance analysis of linear, 2D and 3D dimensional chains (Worst case, Root Sum Squares, Monte Carlo...). Application is developed in MS Excel, is multi-language and supports Imperial and Metric units.
License: Free to try |
Download [ 2.9 Mb ]
-
by MITCalc
Geometric designs and strength checks of force couplings of shafts with hubs (Interference fit, clamping connection). Application supports Imperial and Metric units and is based on ANSI, ISO, DIN BS, JIS standards.
License: Free to try |
Download [ 1.5 Mb ]
-
by MITCalc
Geometric and strength designs of helical tension cylindrical springs loaded with static loading. Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems.
License: Free to try |
Download [ 2.1 Mb ]
-
by MITCalc
Geometric designs and strength checks of shaped connections of shafts with hubs (keys, splines). Application supports Imperial and Metric units, is based on ANSI, ISO, DIN BS, JIS standards and support many 2D CAD systems
License: Free to try |
Download [ 1.5 Mb ]
-
by MITCalc
Selection, calculation and check of rolling bearings of the company SKF. Application supports Imperial and Metric units, is based on SKF, ISO, ANSI, SAE standards and support many 2D and 3D CAD systems
License: Free to try |
Download [ 2.1 Mb ]
-
by MITCalc
The calculation is designed for geometrical design and complex strength check of shafts.
Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems
License: Free to try |
Download [ 1.5 Mb ]
-
by MITCalc
This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and many others. MITCalc support 2D and 3D CAD systems, Imperial and Metric units and many international standards (ANSI, ISO, DIN….).
License: Free to try |
Download [ 22 Mb ]
-
by MITCalc
Geometric and strength designs of helical compression cylindrical springs loaded with static or fatigue loading. Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems.
License: Free to try |
Download [ 1.9 Mb ]
-
by MITCalc
Geometric design and strength check of spur gear with straight and helical toothing. Application supports Imperial and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems
License: Free to try |
Download [ 2.2 Mb ]
-
by MITCalc
Geometric design and strength check of belt transmissions using V-belts. Application contain a database of belts, supports Imperial and Metric units, is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and 3D CAD systems.
License: Free to try |
Download [ 1.8 Mb ]
All software by MITCalc
